Vehicles
184 not categorized PORSCHE 914 FRONT AXLECan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.19271628 The kw suspension hydraulic lift system provides additional road clearance for lowered vehicles. When expanded, a range of up to 45mm of lift is produced, thereby helping lowered cars avoid road clearance difficulties such as speed bumps or road construction. General Fitment911 TURBO/GT2 2007-09
$7,059.14
Make a selection 19271654 With the hls lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speedbumps, railroad crossings, road works, garages and underground car parks. Depending on the version of the hls lift system your vehicle can be hydraulically lifted either at the front axle or on both axles by up to 45 mm. General FitmentCAYMAN 2009-12
$6,864.74
Make a selection 11595B00HR Lowering up 40mm, front axle load 1290kg / 1340kg rear
$614.90
Make a selection 240991352RSL1 Pagid yellow rsl1 are from the rsl line of endurance racing brake pads. They are a high friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl1 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and have good friction stability vs. Temperature. Applications include: GT cars, touring cars, prototype racing and in spring racing. Features at a glance: high friction coefficient high bite high fade resistance high pad and disc life high modulation pagid is one of the leading manufacturers of racing brake pads and is successful at the world's most demanding racetracks. They offe...(choose a part on the right to read more)
$743.60
Make a selection 35271243 The hls provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. Kw hls is available as vehicle specific solution or individual conversion kit depending on the car model. General Fitment911 2009-12
$10,462.49
Make a selection 35271203 The kw suspension variant 3 coilover system is state-of-the-art technology derived from motorsports competition for a more precise performance on the road. The separate and independently adjustable rebound and compression dampening allows for individual suspension setups with different uses and preferences. The unique patented system with its two-stage valves allows a rebound dampening adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range, while the high-speed range which controls the driving safety, is fixed. General Fitment911 1998-05
$11,765.24
Make a selection 35271219 Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 c4 05+ General Fitment911 2005-08
$11,311.64
Make a selection 35271254 With the hls lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speedbumps, railroad crossings, road works, garages and underground car parks. Depending on the version of the hls lift system your vehicle can be hydraulically lifted either at the front axle or on both axles by up to 45 mm. General FitmentCAYMAN 2009-12
$8,565.74
Make a selection 35271415 Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 c2 05+ General Fitment911 2005-08
$12,143.24
Make a selection 35271423 Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 turbo 07+ General Fitment911 TURBO/GT2 2007-09
$13,655.24
Make a selection 35271223 Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 turbo 07+ General Fitment911 TURBO/GT2 2007-09
$11,765.24
Make a selection FVD35161121 Wheel spacers make your tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety, or simply desire your car to make a statement about your individual style, wheel spacers can help you accomplish your goal. This spacer includes a hub centric design that makes the spacer act as a precise extension of the axle hub for wheel balance. It bolts to the hub by reusing the existing wheel studs, the wheel is then bolted to the spacer studs and affixed with included nuts. Size: 21 mm (.826 inches) bolt pattern: 5/130 center bore: 71.6 bolt / stud: stud thread type: 14x1.5 material: strength tested alumin...(choose a part on the right to read more)
$118.80
Make a selection 68510316 The new kw isuspension is state-of-the-art technology derived from motorsports competition for a more precise performance on the road. The kw ddc (dynamic dampening control) coilover with edc (electronic control unit) is one of the first aftermarket coil overs that offers an individual lowering in combination with an electronic damper setup. In addition to an adjustable suspension they now offer to adjust the setting of your suspension real time via iphone or ipad. After downloading the app, you can configure your suspension system individually wherever you are. It comes with three standard setups, which you can either choose via the ddc button in your car or the app on your mobile device. It offers comfort, sp...(choose a part on the right to read more) General Fitment911 2009-12
$661.49
Make a selection 99950796002 Known as: cable holder repair kit wiring harness front axle see group 9/02/10 View/Change Diagram
$1.69
Make a selection BBI9964010006 Finally, a solution that allows you to safely increase without the risk of damaging your front axles. as you add GT3 shims to your front Porsche 996/997 turbo lower control arms, you move the cv joints beyond their safe range of motion, risking failure and expensive damage. These 10mm thick precision spacers, used with 16mm of lca shims will provide an additional -1.7 deg. Of camber, while maintaining the factory cv joint and axle relationship. the spacer design features a concentric lip that positively and accurately locates it to the cv joint for perfect balance and no vibration. Each kit includes two spacers and all the needed hardware in high class 10.9 grad
$375.00
Make a selection FVD33396410 A cost effective FVD exclusive combination of bilstein clubsport shocks with a set of eibach pro kit springs. This suspension kit is meant for those who want the car to sit at the lowest possible ride height. This set up will allow you to lower the front axle by 2.4 inches (60 mm). This is a perfect kit for clubsport or race use where the surfaces are smooth and even. The stock rs ride height was 1.6 inches (40 mm) lower. So, this is a full 3/4 of an inch (20 mm) lower on the front axle. Sold as a complete kit. 1 kit is necessary per car. Please note: we recommend the b6 / ohlins suspension kits for those looking for more comfort for street use.
$2,726.50
Make a selection FVD33399300 A cost effective FVD exclusive combination of bilstein clubsport shocks with a set of TUV certified eibach springs. This suspension kit will lower the front axle to a maximum of 35 mm (1.37 inches) and the rear axle to 30 mm (1.18 inches), like the European rennsport model. The height is adjustable as the dampers are threaded. They are a cost effective solution for clubsport use and will be well mannered on the street. Sold as a complete kit. 1 kit is necessary per car.
$11,872.30
Make a selection 19271215 The kw hls (hydraulic lift system) provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc. The hydraulic cylinder unit is installed between the spring perch and spring. The pump unit is installed inside or near the spare wheel well. A programmable control unit processing the can bus signal for speed control is also included in the kit. General Fitment911 2005-08
$6,492.14
Make a selection FVD35113ABE The zimmermann sport brake disc combines high-quality cast materials, a vented and drilled braking surface and includes z-coating. This is a direct replacement for original number 911 351 041 22. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty drilled look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Sold individually. 2 rotors would be needed for the front axle. Left or right-side fitment. Please note: we also sell a complete front sport kit, part # FVDbsk35191103s. The correct rear rotors set would be our part # FVDbsk352911...(choose a part on the right to read more) General Fitment911 1970-73
From $145.20
Make a selection FVD35123ABE The zimmermann sport brake disc combines high-quality cast materials, a vented and perforated braking surface and includes z-coating. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Sold individually. 2 rotors would be needed for the front axle. Left or right side fitment. General Fitment968 1992-95944 1982-85 944 1985-88
From $209.62
Make a selection FVD35120ABE The zimmermann sport brake disc combines high-quality cast materials, a vented and perforated braking surface and includes z-coating. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Sold individually. 2 rotors would be needed for the front axle. Left or right side fitment. General Fitment944 1982-85944 1985-88
From $159.29
Make a selection FVD35161115 Wheel spacers make your tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety, or simply desire your car to make a statement about your individual style, wheel spacers can help you accomplish your goal. This spacer includes a hub centric design that makes the spacer act as a precise extension of the axle hub for wheel balance. It bolts to the hub by reusing the existing wheel studs, the wheel is then bolted to the spacer studs and affixed with included nuts. Size: 15 mm (.59 inches) bolt pattern: 5/130 center bore: 71.6 bolt / stud: stud thread type: 14x1.5 material: strength tested aluminu...(choose a part on the right to read more)
$103.40
Make a selection FVD34391192SET Replace worn-out original front lower control arm bushings with our FVD sport bushings, made of rubber with an 85 shore hardness value that is the same as the rs models. 85 shore is more durable, provides more positive suspension location and is still quiet and comfortable for street use. Features: better handling reduces that sloppy steering feel makes precision adjustments of the suspension easier does not produce any noise like the teflon bushings. Rubber has a shore hardness value of 85 (like rs models) fit's like oem, simple installation made in Germany set is sold per axle. 2 necessary per car.
$158.40
Make a selection FVD51299124MM The moshammer stormforce evo rs rear spoiler for the 991.2 model blends a bit of Porsche ducktail heritage into its design to increase rear downforce and reduce front axle uplift. The contours of this spoiler have a step effect which seamlessly blends into both rear quarter panels. When viewed at a standstill it has a subtle factory like appeal that complements the cars lines. When deployed the rake angle takes on a more aggressive appearance evoking thoughts of the much beloved ducktails. Like a majority of the moshammer offerings, this spoiler is a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looki...(choose a part on the right to read more)
$1,455.30
Make a selection FVD35161126 Wheel spacers make your tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety, or simply desire your car to make a statement about your individual style, wheel spacers can help you accomplish your goal. This spacer includes a hub centric design that makes the spacer act as a precise extension of the axle hub for wheel balance. It bolts to the hub by reusing the existing wheel studs, the wheel is then bolted to the spacer studs and affixed with included nuts. Size: 26 mm (1.02 inches) bolt pattern: 5/130 center bore: 71.6 bolt / stud: stud thread type: 14x1.5 material: strength tested alumin...(choose a part on the right to read more)
$132.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |